201
1. Make sure you installed the product software and connected the product to your computer or
network.
Note: Restart your computer after installing the product software to enable scanning from the control
panel.
2. Place your original on the product for scanning.
Note: To scan a double-sided or multi-page document, place your originals in the ADF.
3. Press the home button, if necessary.
4. Select Scan.
You see a screen like this:
5. Select one of the following Scan to options:
• Network Folder/FTP saves your scan file to a specified folder on a network.
• Email lets you send scanned files through a pre-configured email server.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
