Epson WF-C17590 - Changing the Operation Time out Setting

33
You see the Basic Settings screen:
4. Select LCD Brightness.
5. Select the – or + icons to decrease or increase the brightness.
6. When you finish, select OK.
7. Press the home button to exit.
Parent topic: Using the Control Panel
Changing the Operation Time Out Setting
The Operation Time Out setting causes the LCD screen to return to the Home screen after a few minutes
of inactivity. This feature is enabled by default, but you can turn it off.
Note: This setting can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance.
1. Press the home button, if necessary.
2. Select Settings.
Downloaded from ManualsNet.com search engine