EasyManua.ls Logo

Epson WF-C17590 - Page 376

Epson WF-C17590
427 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
376
If printing becomes slower after printing continuously for a long time, the product may have
automatically slowed down to protect the print mechanism from overheating or becoming damaged.
Let the product rest with the power on for 30 minutes, then try printing again.
If you are printing over a wireless network, factors such as interference, network traffic, or weak signal
strength may affect your printing speed.
Note: If you are using a 5 GHz wireless router, set the router to operate in dual band (2.4 GHz and
5 GHz) mode. If your router uses a single network name (SSID) for both the 2.4 GHz and 5 GHz band,
give each band its own network name (SSID) instead, such as Home Network 2.4 GHz and Home
Network 5 GHz. See your router documentation or contact your internet service provider for
instructions.
If you are using the Windows PostScript printer software, try selecting Fast as the Print Quality
setting on the Advanced tab of the printer software.
For the fastest printing, select the following settings in your product software:
Make sure the paper type setting matches the type of paper you loaded.
Turn on any high speed settings in your product software.
Select a lower print quality setting.
Windows: Click the Maintenance or Utility tab, select Extended Settings or Speed and Progress,
and select the following settings:
Always Spool RAW Datatype
Page Rendering Mode
Print as Bitmap
If printing is still slow and you are using Windows 7 or Windows Vista, try the following:
1. Click and select Computer or My Computer. Double-click the C: drive and open these folders:
ProgramData > EPSON > PRINTER.
Note: If you do not see the ProgramData folder, open the Organize menu and select Folder and
search options. In the window that appears, click the View tab, select Show hidden files, folders,
and drives in the Advanced settings list, and click OK.
2. Right-click the EPAUDF01.AUD file and select Delete.
3. Restart your computer and try printing again.
Parent topic: Solving Problems Printing from a Computer
Downloaded from ManualsNet.com search engine

Table of Contents

Related product manuals