Epson XP-243 Series' XP-245 Series - Network Settings

+ Press and buttons simultaneously to run software on a USB-connected computer
and scan as a PDF le.
+ or Press the y and the or buttons simultaneously to copy in draft mode.
For users in Western Europe, the draft mode is not available.
+ Hold down the and buttons simultaneously for three seconds to start PIN Code
Setup (WPS).
+ Turn the printer on while holding down the button to restore the default network
settings. When the network settings are restored, the printer turns on and the network status
lights ash orange and green.
+
Turn the printer on while holding down the y button to print the nozzle check pattern.
Related Information
& “Checking the Error Indicators on the Printer” on page 99
& “Making Wi-Fi Settings by PIN Code Setup (WPS)” on page 19
& “Restoring the Network Settings from the Control Panel” on page 27
User's Guide
Printer Basics
15