Printing Is Too Slow
❏ When printing continuously for approximately more than 30 minutes, printing slows down to prevent the
printer mechanism from overheating and being damaged. However, you can continue printing. To return the
printer to normal printing speed, cancel printing, and leave the printer idle for at least 30 minutes with the
power on. e printer does not recover if the power is o.
❏ Close any unnecessary applications.
❏ Lower the quality setting on the control panel or the printer driver. High quality printing slows down the
printing speed.
❏ Enable the bidirectional (or high speed) setting. When this setting is enabled, the print head prints while
moving in both directions, and the printing speed increases.
❏ Wi n d o w s
Select High Speed on the printer driver's More Options tab.
❏ Mac OS X
Select System Preferences from the
menu > Printers & Scanners (or Print & Scan, Print & Fax), and
then select the printer. Click Options & Supplies > Options (or Driver). Select On as the High Speed
Printing setting.
❏ Disable quiet mode. is feature slows down the printing speed.
❏ Wi n d o w s
Disable the Quiet Mode setting on the printer driver's Main tab.
❏ Mac OS X
Select System Preferences from the
menu > Printers & Scanners (or Print & Scan, Print & Fax), and
then select the printer. Click Options & Supplies > Options (or Driver). Select
O
as the Quiet Mode
setting.
Cannot Start Scanning
❏ Connect the USB cable securely to the printer and the computer.
❏ If you are using a USB hub, try to connect the printer directly to the computer.
❏ If you cannot scan over a network, see the Network Guide.
❏ If you scan at a high resolution over a network, a communication error may occur. Lower the resolution.
❏ Make sure you select the correct printer (scanner) if a scanner list is displayed when you start EPSON Scan.
❏ If you are using any TWAIN-compliant applications, select the printer (scanner) you are using.
User's Guide
Solving Problems
102
To Next Page
Loading...
