3. Close the scanner unit.
Paper Does Not Feed Correctly
Check the following if the paper jams, paper is fed at a slant, several sheets of paper are fed at a time, no paper is
fed, or paper is ejected.
❏ Place the printer on a at surface and operate in the recommended environmental conditions.
❏ Use paper supported by this printer.
❏ Follow the paper handling precautions.
❏ Load paper in the correct direction, and slide the edge guide against the edge of the paper.
❏ Do not load more than the maximum number of sheets specied for the paper. For plain paper, do not load
above the line indicated by the triangle symbol on the edge guide.
❏ When a paper out error occurs although paper is loaded in the printer, reload paper against the right edge of the
rear paper feed.
❏ Load one sheet of paper at a time when loading multiple sheets of paper.
❏ When several sheets of paper are fed at a time during manual 2-sided printing, remove any paper which is
loaded in the paper source before you reload the paper.
❏ Load and eject paper without printing to clean the paper path.
❏ Printing may pause for a certain length of time. If printing is paused, the paper is ejected.
❏ Make sure the paper size and paper type settings are correct.
Related Information
& “Environmental Specications” on page 112
& “Available Paper and Capacities” on page 23
& “Paper Handling Precautions” on page 22
& “Loading Paper in the Rear Paper Feed” on page 25
User's Guide
Solving Problems
96
To Next Page
Loading...
