4 Insert the cartridges at an angle in the holder for each
color. Press each cartridge down until it clicks.
5 Lower the scanner unit.
6 Select Installed. Ink charging takes approximately 10
minutes. When you see a completion message on the
printer’s LCD screen, charging is complete.
Caution: Don’t turn o the printer or raise the scanner unit while
the printer is charging or you’ll waste ink.
Note: As part of setup, your product’s serial number will be sent
to a secure Epson server so that you can be eligible to participate
in programs we may oer from time to time, including the Epson
ink replenishment program. You will have a separate opportunity
to consent to participating in such programs.
7 Follow the on-screen instructions to adjust the print
quality of your product.
Note:
• You need to load paper before you can adjust the print quality.
See the “Load paper” section for details.
• Select Adjust Later if you want to adjust the print quality later.
For more information, see the online User’s Guide.
5
Load paper
See the instructions below for loading paper in cassettes
1 and 2.
Note: See the online User’s Guide for a complete list of compatible
paper types, sizes, and capacities, and instructions on loading paper in
the rear paper feed slot and printing on
CD/DVD/Blu-ray Discs™.
Output tray
Cassette 1
Cassette 2/
front cover
Epson paper sizes Cassette 1 Cassette 2
4"
× 6", 5" × 7"
• •
8" × 10", Letter, A4, Legal
•
IMPORTANT: Before using this product, make sure you read
these instructions and the safety instructions in the online
User’s Guide.
Note: This printer is designed for use with Epson
®
cartridges only, not
third-party cartridges or ink. For important ink information, visit
http://epson.com/epsonink (U.S.) or http://epson.ca/epsonink
(Canada) or see your printer box.
1
Unpack
Protective
material
Note:
• Do not open ink cartridge packages until you are ready to install the
ink. Cartridges are vacuum packed to maintain reliability.
• Do not throw away the protective material shown above. Tape this
piece to the top of the ink cartridge holder when transporting your
product. For more information, see the online User’s Guide.
• The CD/DVD tray is stored underneath cassette 2.
1 Remove all tape and packing materials from the product.
2 Lift up the scanner unit. Remove all tape and packing
materials from inside the product.
Caution: Do not touch the at, white cable.
3 Lower the scanner unit.
4 Connect the power cord to the back of the printer and to an
electrical outlet.
Caution: Do not connect to your computer yet.
2
Choose a setup method
The Epson Smart Panel
®
app can help you set up your printer
through an interactive, step-by-step process using your
smartphone or tablet.
If you do not want to use
a mobile device for setup,
skip to the “Turn on and
congure” section.
To use your mobile device
for setup, continue to
step 1.
or
1 Download the Epson Smart Panel app
from your device’s app store. Do not
launch the app yet.
2 Press the power button to turn on the product.
Note: Do not connect your product to your computer yet.
3 Launch the app and follow its instructions to set up your
product.
For information on connecting your product to a computer, using
voice-activated printing, or solving problems, or for details on
reaching Epson support, see the sections on the back of this
sheet.
3
Turn on and configure
1 Turn on the product, then adjust the control panel.
2 Select your language on the LCD screen.
Note:
• You can change this setting later using the product’s control
panel. For more information, see the online User’s Guide.
• If an error message appears, turn off the product and check that
no protective material has been left inside the product.
4
Install ink cartridges
Caution: Keep the ink cartridges out the reach of children and do not
drink the ink.
Note: The included initial cartridges are designed for reliable printer
setup and cannot be used as replacement cartridges or resold. After
setup, the remaining ink is available for printing.
1 Lift up the scanner unit.
Caution: Do not touch the at, white cable or the print head path.
2 Unpack the ink cartridges.
Caution:
• Do not shake the ink cartridges.
• Do not touch the areas shown below. Doing
so may prevent normal operation and
printing.
3 Remove the cap from each ink cartridge. Store the caps in
the included plastic bag.
Note: Save the caps and use them to recap the ink cartridges after
removing them for storage or disposal.
Start Here
XP-8700 Small-in-One
To Next Page
Need help?
General
