EqualLogic PS Series - User Manual

Hardware Maintenance
Hard ware Maintsss s

Summary

Steps for Setting Up and Using an Array

Core Setup and Configuration Steps

Lists the five main steps for setting up and using the PS Series array.

Set Up Array Hardware Configuration

Unpack, ESD Protection, and Shipping Box Contents

Instructions for unpacking, ESD protection, and contents of the shipping box.

Mount Array in a Rack

Install Disks or Blank Carriers

Connect Power Cables for Grounding

Connect Array to a Network Switch

Power On and LED Status Indicators

Connect Console Terminal

Configure Array and Create Group

Member and Group Configuration Prompts

Group Configuration Details and Example

Set the RAID Policy

Supported RAID Policies

Configure RAID Policy Using GUI

Step-by-step guide to setting the RAID policy via the Group Manager graphical interface.

Configure Member Settings and Summary

Using CLI to Set RAID Policy

Command-line method for setting the RAID policy for array members.

Create a Volume

Volume Information Parameters

Volume Access Controls

Create Volume Using GUI

Step-by-step guide to creating a volume via the Group Manager graphical interface.

Volume Space Reserve and iSCSI Access Settings

Create Volume Using CLI

Command-line method for creating storage volumes and setting access controls.

Connect to Volume from Host System

Host Connection Procedure

Steps for connecting a host system to an iSCSI target volume.

EqualLogic PS Series Specifications

General

Brand	EqualLogic
Model	PS Series
Category	Network Hardware
Language	English