equate 6500 Series - User Manual

The Equate Wrist Blood Pressure Monitor, model 6500 Series, is a wireless device designed for ease of use and accuracy in daily blood pressure regimens. It measures blood pressure and pulse rate for adults in a home healthcare environment.

Function Description:

The monitor measures systolic and diastolic blood pressure in mmHg and pulse rate in beats per minute. It features an oscillometric measurement method. The device is designed to operate by itself and is not intended for infants or children. It includes a C.P.G. (Correct Position Guidance) indicator to help users maintain the correct wrist angle relative to cardiac height during measurement, aiming for more stable results. The monitor also detects irregular heartbeats (I.H.B. symbol) and provides an AHA Classification Indicator to categorize blood pressure readings (Stage 2 Hypertension, Stage 1 Hypertension, Elevated, Normal).

Important Technical Specifications:

• Measurement Method: Oscillometric
• Measurement Range:
  • Pressure: 0 - 299 mmHg
  • Systolic Pressure: 60 - 279 mmHg
  • Diastolic Pressure: 40 - 200 mmHg
  • Pulse: 40 - 180 beats/minute
• Measurement Accuracy:
  • Pressure: ±3 mmHg
  • Pulse: ±5%
• Power Supply: 2 x 1.5V alkaline batteries (LR03 or AAA)
• Number of Measurements: Approximately 110 measurements with AAA alkaline batteries (with pressure value 170 mmHg, room temperature 23 °C).
• Classification: Internally powered ME equipment (by batteries), Continuous operation mode.
• Wireless Communication: Bluetooth® Ver.5.1LE BLP
  • Frequency Band: 2402 MHz to 2480 MHz
  • Maximum RF Output Power: < 10 dBm
  • Modulation: GFSK
  • Supported Data: Systolic Pressure, Diastolic Pressure, Pulse Rate
  • Communication Distance: About 10 m (reduced by surrounding environment conditions).
  • Paired Device: 4 devices
• Memory: 90 measurements per user.
• Operating Conditions: +10 to +40 °C / 15 to 85 %RH / 800 to 1060 hPa
• Transport/Storage Conditions: -20 to +60 °C / 10 to 95 %RH / 700 to 1060 hPa
• Cuff Size: 5.3" - 8.5" (13.5 - 21.5 cm)
• Dimensions: Approx. 2.2"[W] x 3.5"[H] x 0.8"[D] (56[W] x 88[H] x 20[D]mm)
• Weight: Approx. 3.5 oz (100 g), excluding batteries.
• Ingress Protection: Device: IP22
• Applied Part: Cuff: Type BF
• Useful Life: Device: 5 years (when used six times a day).

Usage Features:

The monitor is designed for easy operation, with a clear display showing SYS (systolic), DIA (diastolic), and PUL/min (pulse per minute) values.

• Battery Installation: Requires 2 x 1.5V LR03 or AAA alkaline batteries. Users are advised to replace all batteries with new ones when the LOW BATTERY symbol blinks and not to mix old and new batteries.
• Cuff Application: The cuff should be wrapped around the wrist about 1 cm below the hand and fastened tightly with the Velcro strip on a bare wrist.
• Measurement Process:
  1. Sit comfortably with feet on the floor, back straight, and arm on a table with the palm facing upward, cuff at heart level.
  2. Relax for 5-10 minutes before measurement.
  3. Press the START button. The device will inflate the cuff and automatically begin measurement.
  4. Remain still and quiet during measurement.
  5. The C.P.G. indicator helps guide wrist positioning for accurate readings.
• Memory Recall: The device stores up to 90 measurements per user. Users can recall average data, most recent data, and oldest data.
• Date and Time Setting: The monitor has a built-in clock that automatically adjusts by syncing with a mobile device during the Bluetooth® pairing process.
• Bluetooth® Connectivity: The monitor connects to mobile devices (smartphones or tablets) via Bluetooth® using the free Equate Heart Chart app. This allows for transferring measurement data and storing it in the app.
• Automatic Power Shut-off: The device automatically turns off after one minute of non-operation, storing current data in memory.
• Troubleshooting: The manual provides guidance for common issues such as no display, cuff not inflating, or inaccurate readings, suggesting actions like battery replacement or proper cuff application.

Maintenance Features:

• Cleaning: The device and cuff should be cleaned with a dry, soft cloth or a cloth dampened with water and a neutral detergent. Alcohol, benzene, thinner, or harsh chemicals should not be used.
• Storage: Avoid extreme temperatures, humidity, direct sunlight, shock, or dust. The cuff should not be tightly folded for long periods.
• Water Resistance: The device and cuff are not water resistant; prevent rain, sweat, and water from soiling them.
• Battery Removal: Remove batteries if the device will not be used for a long time to prevent leakage and malfunction.
• Interference: Measurements may be distorted if the device is used near televisions, microwave ovens, cellular telephones, X-ray, or other devices with strong electrical fields. A minimum distance of 12 inches (30 cm) should be maintained from wireless communication devices.
• Disposal: Used equipment, parts, and batteries must be disposed of according to applicable local regulations.
• No User Serviceable Parts: The device should not be opened or repaired by the user. Any issues not resolved by troubleshooting should be directed to customer service.