What to do if Measuring Error Symbol appears on Equate Blood Pressure Monitor?
If your Equate Blood Pressure Monitor displays the Measuring Error Symbol when the blood pressure value shown is excessively low or high, it might be due to incorrect cuff placement. Make sure to wrap the cuff properly so that it is positioned correctly. Also, avoid talking or moving during the measurement and keep your arm steady.
Why my Equate Blood Pressure Monitor won't connect to Bluetooth?
If your Equate Blood Pressure Monitor cannot communicate with your Bluetooth-enabled device, ensure that pairing has been completed by re-pairing the devices. Also, confirm that the Bluetooth function is turned on by pressing the button once in sleep mode. Verify that the distance between the devices is within the acceptable range (
Why equate HL858CE cannot communicate with Bluetooth-enabled device?
There could be several reasons why your Equate Blood Pressure Monitor isn't connecting to your Bluetooth device: * Pairing might not be complete. Try re-pairing the devices. * Bluetooth might be off. Press the button once in sleep mode to turn it on. * The devices might be too far apart. Keep them within 10 meters of each other. * The Bluetooth device may be incompatible. Refer to Page 16 “Bluetooth compatibility” & Page 37 "RF Specification”. * Try re-inserting the batteries.
What to do if equate HL858CE shows Measuring Error Symbol?
If your Equate Blood Pressure Monitor displays a Measuring Error Symbol, it could be due to several reasons: * There might be an air circuit abnormality. Check the cuff connection and measure again. * The inflation pressure might be exceeding 300 mmHg. Switch the unit off and measure again. * The device can’t determine blood pressure measurement data. Wrap the cuff properly, keep steady, and measure again. * If the device cannot connect to a paired Bluetooth device for over 45 seconds, press the button once to start the Bluetooth function.
How to fix an equate HL858CE that won't turn on?
If your Equate Blood Pressure Monitor does not turn on when you push the button, the batteries may be worn out. Replace them with 4 new AA (LR6) alkaline batteries. Alternatively, the battery polarities may be positioned incorrectly; re-insert the batteries in the correct positions.
How to fix an equate HL858CE Blood Pressure Monitor that does not turn on?
If your Equate Blood Pressure Monitor isn't turning on, it could be due to: * Worn-out batteries. Replace them with 4 new AA (LR6) alkaline batteries. * Incorrect battery placement. Re-insert the batteries in the correct positions.
How to fix an Equate Medical Equipment that won't turn on?
If your Equate Medical Equipment does not turn on when you push the button, replace the batteries with four new AA (LR6) alkaline batteries. Also, ensure that the battery polarities are positioned correctly.
What to do if Equate Medical Equipment shows a measuring error and incorrect blood pressure?
If your Equate Medical Equipment displays the '& Measuring Error Symbol' and the blood pressure value is either excessively low or high, ensure the cuff is correctly positioned. If you were talking or moving during the measurement, remain still and measure again.
Why won't my Equate Medical Equipment connect to Bluetooth?
If your Equate Medical Equipment is not communicating with your Bluetooth-enabled device, try re-pairing the devices. Ensure the Bluetooth function is turned on by pressing the button once in sleep mode. Maintain a distance of no more than 110 meters between the devices. Also, verify that you are using a compatible Bluetooth-enabled device. If there was an unexpected loss of electrical/mechanical integrity, re-insert the batteries and try again.
Essential safety guidelines and operating environment conditions.
Conditions where the product is not suitable for use.
Steps to power on the device and initial screen display.
Procedure for configuring the device's date and time.
Instructions for initiating a single blood pressure measurement.
Detailed steps for performing a single measurement.
Procedure for taking multiple averaged measurements.
Automatic Bluetooth data transfer after measurement.
Automatic storage of measurement results with date and time.
Viewing stored measurements, including averages.
General| Category | Blood Pressure Monitor |
|---|---|
| Brand | Equate |
| Model | HL858CE |
| Type | Upper Arm |
| Display | LCD |
| Cuff Size | 22-42 cm |
| Accuracy (Pressure) | ±3 mmHg |
| Accuracy (Pulse) | ±5% |
| Features | Irregular Heartbeat Detection, Hypertension Indicator |
To Next Page
