22
Using the AC/DC adapter
This monitor is designed for operation with batteries or an AC/DC
adapter.
Please use only a compatible AC/DC adapter with required voltage and
current as indicated in this manual.
*Note
！
‧ No batteries are needed when operating with an AC/DC adapter.
‧ Please unload the batteries when operating with an AC/DC adapter
for an extended period of time.
‧ Leaving the batteries in the compartment for a long time may cause
leakage, which may lead to damage of the unit.
‧ Recommend Adapter specification, do not use otherwise:
Model: SINPRO, HPU15-102
Rating:
Input: 100 ~ 240V, AC, 47 ~ 63 Hz, 0.4 ~ 0.2 A
Output: 5.99V, DC, 2A,
*Note
！
When you use the blood pressure monitor with AC/DC adapter, do not
position the device to make it difficult to disconnect the adapter plug.
To Next Page
Loading...
