To Next PageTo Next PageWhat to do if my EQUATION AC-2-SA is not cooling?
If your EQUATION Air Conditioner isn't cooling the room, make sure the 'Cooling' mode is enabled. Ensure there's good air circulation around the unit's inlet and outlet. Check that the filter is clean and not blocked. Verify the set temperature is lower than the room temperature. Finally, confirm all doors and windows are properly closed.
General| Brand | EQUATION |
|---|---|
| Model | AC-2-SA |
| Category | Air Conditioner |
| Language | English |
Details on connecting the exhaust duct for cooling or dehumidification modes, and its non-necessity in ventilation mode.
Instructions for fitting the window slider kit, including adjustment of length for sliding windows.
Identifies and explains the various controls and displays on the device's main panel.
Describes the buttons and operations available on the remote control for managing the air conditioner.
Guide for operating the air conditioner in cooling mode, including exhaust connection and fan speed settings.
Instructions for using the device solely in fan mode, without cooling or dehumidification.
Steps for operating the unit in dehumidification mode, including drainage requirements.
Explanation of the auto mode where the device self-regulates settings to reach the target temperature.
How to set the timer for automatic start or stop of the air conditioner within a 24-hour period.
How to activate and use the sleep mode for a more comfortable sleeping environment.
Instructions for activating the air outlet swing feature for wider air distribution.
Method to lock or unlock the remote control to prevent unintended operation by children.
Guide on cleaning the air filter, including reset indicator and frequency for optimal performance.
How to clean the external surfaces of the appliance safely and effectively using soft cloths.
Procedure for draining the internal water tank when it is full, indicated by 'P1' on the display.
