EQUATION YAA02E-9HC - Heater Operation - Controls and Features; Indoor Use Restriction; Control System Features Overview

Humidifying box cleaning
11 12 13
14 15
11
14
12
15
13
• Open the humidifying box and take out the water box like Pic
11
, move off the box
cover like Pic
12
.
• Clean the box like Pic
13
.
• Put back the water box cover and put the water box back into the humidifying box like
Pic
14
&
15
.
Note: Do not clean the box with metal brush, it may damage the water box.
INDOOR USE ONLY!
• Install the battery like PIC 16
• Plug the appliance to 220-240V
50/60Hz socket
• Press the power switch
• Unplug the product when it’s not in use.
The control system is with following functions:
• With digital LCD to let you know the working situation of the unit.
• Room temperature setting to enable you to set the desired room temperature.
• Room temperature sensor to control the heating of the unit according to your desired
room temperature.
• Digital clock, digital week calendar.
3. HOW TO USE
Control panel and LCD screen
Control panel:
There are total 5 buttons on the control panel as follows:
— Standby(on / off)
— Temperature, Date and time settings, working program setting(Mode P),
continuous heating mode(Mode M)
— Mode selecting (Program-2000W, Manual in low power-1200W, Manual in
high power-2000W)
Note: Press MODE to set manual or program mode (M or P is displayed on the screen).
In program mode, only 2000W power available.
— Increasing;
— Decreasing;
Pressing
or , you can increase or decrease the target temperature directly (in
manual or program mode) while in the main screen
3. HOW TO USE
8180
FR
ES
PT
FR
ES
PT
EL
PL
RO
EL
PL
RO
EN
EN