EQUATION YAA02E-9HC User Manual

YAA02E-9HC
EAN CODE : 3276000644989 / 3276005872820
Traduction de la version originale du mode d’emploi / Traducción de las Instrucciones originales / Tradução das Instruções Originais / Μετάφραση τωνπρωτότυπωνοδηγιών /
Tłumaczenie instrukcji oryginalnej / Traducerea instrucţiunilor originale / Original Instructions
2019/01-V01
OIL HEATER
Ce produit ne peut être utilisé que dans des locaux bien isolés ou de manière occasionnelle.
Este producto está indicado únicamente en lugares abrigados o para una utilización puntual.
Este produto é adequado apenas para espaços bem isolados ou para uma utilização ocasional.
Tο προϊόν είναι κατάλληλο μόνο για χρήση σε καλά μονωμένους χώρους ή περιστασιακά.
Ten produkt jest odpowiedni tylko do sporadycznego uzytku lub do stosowania w dobrze izolowanych pomieszczeniach.
Acest produs este adecvat numai pentru spaiile bine izolate sau pentru utilizarea ocazionala.
This product is only suitable for well insulated spaces or occasional use.
Notice de Montage -
Utilisation - Entretien
FR
Instrucciones de Montaje,
Utilización y Mantenimiento
ES
Instruções de Montagem,
Utilização e Manutenção
PT
PL
Manual asamblare,
RO
Assembly - Use -
Maintenance Manual
EN
EL

EQUATION YAA02E-9HC Specifications

General

Brand	EQUATION
Model	YAA02E-9HC
Category	Heater
Language	English

Summary

Installation Guidelines

Installation Precautions and Placement

Warnings and guidelines for safe installation, moving, and placement of the heater.

Heater Operation - Controls and Features

Indoor Use Restriction

Important note that the product is intended for indoor use only.

Control System Features Overview

LCD Screen and Basic Settings

LCD Screen Layout and Symbols

Initial Setup and Time Setting

Setting the Clock and Date Accurately

Adjusting Target Temperature

How to set the desired room temperature using the controls.

Programming Daily Heating Schedules

Setting up the heating schedule in program mode.

Advanced Control Functions

Configuring Hourly Heating Status

Setting the heater's on/off status for specific hours in program mode.

Selecting Operating Modes and Power

Choosing between program, manual low, and manual high power modes.

Using Continuous Heating Mode

Initial Use and Operation Steps

Initial Power Connection and Placement

Turning the Heater On

Time, Date, and Temperature Settings

Setting the Clock Time Accurately

Setting the Date and Day

Confirming Time and Date Settings

Program and Mode Selection

Programming Heating Schedules

Setting hourly heating status blocks for program mode.

Confirming Program Mode Settings

Setting Target Temperature

Adjusting the desired room temperature (5-35°C).

Selecting Operating Modes

Choosing between program, manual low, and manual high power modes.

Activating Continuous Heating

Usage Illustrations and Safety Reminders

Caution: Do Not Cover Heater

Warning against covering the heater while in operation to prevent hazards.

Understanding Prohibition Symbols

Correct Plug and Unplug Procedure

Maintenance Procedures and Precautions

Prepare for Cleaning: Unplug Unit

Essential first step to unplug the heater before performing any cleaning.

Water Intrusion Hazard Warning

Caution regarding potential hazards from water entering the unit during cleaning.

Cool Heater and Cover for Cleaning

Detailed Cleaning Steps

Prohibited Cleaning: No Immersion

Warning against immersing the heater in water for cleaning purposes.