Equator Super Combo - User Manual

Questions about your new
Super Combo ?
Read the Quick Start Guide located on the
other side of this card for fast, easy reference
to using your new Super Combo Washer-Dryer
OPTION
1
Just choose an option below:
OPTION
2
Call toll-free 1-800-776-3538 to talk with a
customer service representative to help you
get started

Summary

Appliance Installation Steps

Remove Shipping Bolts

Unscrew and pull out shipping bolts from the back of the appliance.

Secure and Close Openings

Fit back screws and use the blanking plug to close the empty space.

Water and Vent Connections

Connect Water Hoses

Connect hot and cold water hoses to the appliance.

Position Drain Hose

Place the drain hose into a sink or standpipe 24"-40" high.

Attach Vent Hose

Attach a 4" vent hose to the exhaust outlet using the provided adapter.

Power Connection

Plug in Power Cord

Plug the power cord into a 110V/60Hz/15A outlet.

Laundry Preparation

Select Drying Option

Press Venting/Condensing button for 5 seconds to select drying option.

Load Laundry

Load the machine to a maximum 2/3 full.

Use Detergent and Softener

Use liquid fabric softener and High-Efficiency (HE) detergent.

Appliance Operation Modes

Wash & Dry Cycle

Turn knob to Wash, set dryer time, select options, and press START.

Wash Only Cycle

Turn knob to Wash setting and press START.

Dry Only Cycle

Turn knob to Dry selection, set dryer time, and press START.

Appliance Maintenance

Clean Interior

Open coin trap, rotate handle counter-clockwise, clean interior, and fix cover.

Equator Super Combo Specifications

General

Brand	Equator
Model	Super Combo
Category	Washer/Dryer
Language	English