Equinox Systems L5300 - Page 8

©2016 ETS Corporation | L5300 Installation and Configuration Guide
8
This information is CONFIDENTIAL and must be used exclusively for the operation of ETS software, hardware, or services. It
may not be duplicated, published, or disclosed without the express permission of ETS.
1. Change the IP address as follows:
a. Hit the yellow Clear button on
the terminal.
b. Enter the
IP Address/Hostname:
209.120.173.91
2. Set the Port to 5110 and uncheck Use TLS.
3. Hit Apply Now at the bottom of the screen.
10. Hit Network