Troubleshooting
A light blinks when
Normal operation Nothing
No power when turning
No power at outlet or
Correct problem and test
Fan runs for a few
minutes after the
appliance is switched off
The unit is cooling down;
normal operation
Nothing
The unit is not working.
The lights on the control
panel are off
There is not power to the
appliance, no power to
outlet or blown internal
Restore power to outlet or
return unit for service
“F” then “-“ appears on the
A control panel button is
Clean front panel or return
“F” then “7” appears on
the control panel
The circuit board is
overheating
Make sure fan is operating
and unit is properly
The appliance is not
functioning, another code
Problem with circuit board Call service center
After turning unit on the
set cook level indicator
Cookware not induction
ready or too small
See cookware section
The cookware is making
noise during cooking
This is a vibration
generated by the induction
This is normal with some
types of cookware and will
There is a slight odor
during first operation
This is normal with any
new appliance
After using for about 30
minutes the odor will go
If the glass cracks discontinue use, unplug the unit immediately
and contact the manufacturer.
To Next Page
Loading...