ERA VALIANT - Solar Charged Siren; Solar Charged Siren Positioning

Siren Duration Setting
Volume Setting Power On/Off
Inner Tamper Switch
Learn Button
Status LED Indicator
Alarm LED Indicators
Rear Cover
Tamper Socket
9V
Start-up
Battery
Rechargeable 3.7V
1800mAh Lithium Battery
4. SOLAR CHARGED
SIREN
4.1. Positioning
4.2. PCB Layout
4.3. Jumper Setup
Install the Siren to the outside of the building in a position that is clearly visible and at a
height which is relatively inaccessible to an intruder.
The Siren is designed to work on any aspect wall, however for optimum performance try
to avoid installing on a north facing wall or to a wall with shadows cast by other buildings,
trees and roof overhangs.
For optimum radio signal reception mount the Solar Siren to Maximum distance of one
metre from any external or internal metalwork (drainpipes, gutters, radiators, etc).
Rear
Anti-tamper
Switch
Sirens
(Default)
High
Mute
Low
High
Mute
Low
5Min
2Min
30s
5Min
2Min
30s
High
Mute
Low
5Min
2Min
30s
Siren Duration
Setting
Volume
Setting
(Default)
Page 8