Eratec TM53 - Operating the ERA-TEC Smart Tea Maker; Basic Operation; Brewing Tea

48
Englisch
• Touch ON/OFF button to switch ON the Tea Maker.
• Touch ON/OFF button to switch OFF the Tea Maker.
Follow these instructions to brew the tea in the
appropriate way:
• Place desired amount of cold water to the tea
maker. Make sure water does not exceed the
maximum level .
You should add at least 0.5 litre water.
• Place the Kettle on the connector base.
• Put sucient amount of tea into the pot’s lter.
• Place the lter into the pot and press from top.
• Touch ON/OFF button to switch ON the Tea Maker.
• Select 1/3, 2/3 or 3/3 to choose your desired tea
strength and operate the tea maker by touching.
User Manual
a. OPERATING THE TEA MAKER
b. BREWING AND SELECT TEA LEVEL
maximum level .