Erato Verse User Manual

Grab the device you want to pair with and turn on Bluetooth and open
the settings page and search for new Bluetooth connection.
Select “VERSE” to pair. Blue led flash every 3 seconds from the LED indicates
your pairing was successful.Once pairing is successful on the earphone, simply
power on the R earbud by holding the power button 1 second to turn on.
The 2nd earphone will automatically sync with the L earbud.
Hold the button on the L earbud for 3 seconds until you see
the LED flashing red/blue and hear “POWER ON”, then the
words “PAIRING”.
PAIR
2
S M L
Ear canal
Select your favorite song and give the VERSE earphones a try. If you feel
that the sound is lacking lows, please adjust the eartip to a size up and
adjust the fitment of the earphones in your ear.
Red = Charging
Blue = Full Charged
Red = < 25% battery remaining
Blue = > 25% battery remaining
Remove plastic tag and
fully charge the VERSE
earphones.
PREPARE / CHARGE
1
1 2
EN

Erato Verse Specifications

General

Type	True Wireless
Wireless	Yes
Bluetooth Version	5.0
Battery Life (Earbuds)	6 hours
Driver Type	Dynamic
Frequency Response	20Hz - 20kHz
Impedance	16 ohms
Battery Life (Charging Case)	24 hours (30 hours total)
Weight	5g per earbud

Summary

Prepare and Charge Your Earbuds

Initial Charging and Tag Removal

Remove protective tags and fully charge the VERSE earphones before first use.

Understanding LED Charging Indicators

Explains the meaning of red and blue LED lights for charging and battery level.

Optimizing Sound with Eartip Fit

Guide on selecting eartip sizes and adjusting earphone fit for improved bass response.

Pairing Your VERSE Earbuds

Activate Earbud Pairing Mode

Steps to activate pairing mode on the L earbud by holding the button until LEDs flash red/blue.

Connect to Your Bluetooth Device

Instructions to enable Bluetooth on a device and select 'VERSE' for pairing.

Syncing the Second Earbud

How to power on the R earbud after successful pairing for automatic synchronization.

Quick Start Guide

Automatic Earbud Power On/Off

How rocking earbuds out of the case turns them on automatically; otherwise, manual power button is needed.

Using Your VERSE Earbuds

Earbud Button Operations: Power & Pairing

Details on long-pressing buttons for power on/off and initiating VERSE pairing.

Music Playback and Call Management

Explains single presses for play/pause and answering calls, and long presses for track control.

Volume Control and Voice Assistant Access

Describes double presses for volume control and activating voice assistants like Siri/Google.

Access Full User Manual

Provides a URL for the full user manual and a QR code for easy access.