Erbauer EBPW3000 - Assembly; Assembly Procedures

20
Assembly
01
Unpacking
1. Unpackallpartsandlaythemonaat,stablesurface.
2. Remove all packing materials and shipping devices, if applicable.
3. Makesurethedeliverycontentsarecompleteandfreeofanydamage.Ifyound
that parts are missing or show damage do not use the machine but contact your
dealer. Using an incomplete or damaged machine represents a hazard to people
and property.
4. Ensure that you have all the accessories and tools needed for assembly and
operation. This also includes suitable personal protective equipment.
WARNING! The machine and the packaging are not children’s toys!
Children must not play with plastic bags, sheets and small parts! There
is a danger of choking and suffocation!
02
Assembly
WARNING! The machine must be fully assembled before the operation!
Do not use a machine that is only partly assembled or assembled with
damaged parts!
Follow the assembly instructions step-by-step and use the pictures
provided as a visual guide to assemble the machine easily!
Disconnect the machine from the socket-outlet before assembly.
NOTE: Take care of small parts that are removed during assembly or
when making adjustments. Keep them secure to avoid loss.
5063022018892-EBPW3000-PressureWasher-UM-V03.indd 205063022018892-EBPW3000-PressureWasher-UM-V03.indd 20 09-11-2022 14:09:0609-11-2022 14:09:06
21
High pressure hose
1. Connect the high pressure hose (13) to the hose connection (17b) of the trigger
gun (17) (Fig. 1, step 1).
2. Tighten the high pressure hose (13) by turning it clockwise to secure it in place
(Fig. 1, step 2).
NOTE: Detach the high pressure hose (13) from the trigger gun (17) by
turning it anti-clockwise.
Extension lance
1. Connect the extension lance (16) to the tip of the trigger gun (17) (Fig. 2, step 1).
2. Tighten the extension lance (16) by turning it clockwise to secure it in place (Fig.
2, step 2).
NOTE: Detach the extension lance (16) from the trigger gun (17) by
turning it anti-clockwise.
5-in-1 nozzle
1. Push the 5-in-1 nozzle (8) towards the tip of the extension lance (16) (Fig. 3).
2. The 5-in-1 nozzle (8) clicks into place securely.
NOTE: Detach the 5-in-1 nozzle (8) by pulling the sleeve at the tip of the
extension lance (16) backwards (Fig. 4).
Twin rotary nozzle
1. Push the twin rotary nozzle (4) towards the tip of the extension lance (16) (Fig. 5).
2. The twin rotary nozzle (4) clicks into place securely.
NOTE: Detach the twin rotary nozzle (4) by pulling the sleeve at the tip
of the extension lance (16) backwards (Fig. 6).
5063022018892-EBPW3000-PressureWasher-UM-V03.indd 215063022018892-EBPW3000-PressureWasher-UM-V03.indd 21 09-11-2022 14:09:0709-11-2022 14:09:07
96456_IM_Erbauer 3000_EU.indb 2096456_IM_Erbauer 3000_EU.indb 20 2023/3/27 上午11:082023/3/27 上午11:08