21
Use
Intended use
The power tool is intended for chiselling work into concrete, brick and stone when
equipped with proper chisel.
Before you start
01
Protection
Controls
01
On/Off (Fig. G)
The power tool can only be operated in continuous mode.
1. Push the upper part of the On/Off switch (3) to switch the product on (“I”).
2. Push the lower part of the On/Off switch (3) to switch the product off (“O”).
02
Power supply indicator (Fig. G)
The power supply indicator (5) lights up when the product is connected to the power
socket.
03
Carbon brush indicator (Fig. G)
The carbon brush indicator (4) lights up when the carbon brushes of the product are
worn out or have another malfunction.
WARNING! Replacement of the carbon brushes shall ONLY be carried
out by the manufacturer of the tool or their service organization.
To Next Page
Loading...
