14
SEE TECHNICAL SPECIFICATIONS IN THE INSTRUCTION
MANUAL FOR THE VIBRATION LEVELS OF YOUR TOOL.
The declared vibration emission value should be used as a
minimum level and should be used with the current guidance
on vibration.
Calculating the actual period of use can be difcult and the
HSE website has further information.
The declared vibration total value has been measured in
accordance with EN 62841-1 and EN 62841-2-4 and may be
used for compare one tool with another.
The declared vibration total value may also be used in a
preliminary assessment of exposure.
WARNING! The vibration emission during actual
use of the power tool can differ from the declared
total value depending on the ways in which the tool
is used:
• How the materials are grinded, cut or drilled.
• If the tool is in good condition and well maintained.
• Use correct accessory for the tool and ensure it is
sharp and in good condition.
• The tightness of the grip on the handles.
• The tool is being used as intended by its design
and these instructions.
While working with this power tool, hand/arm
vibrations occur. Adopt the correct working
practices in order to reduce the exposure
to vibration. This tool may cause hand-arm
vibration syndrome if its use is not adequately
managed.
950W BeltSander MNL_EBS950_TPS_GB_V1_V20518_20180607.indd 14 6/7/18 10:23 AM
To Next Page
Loading...
