22
Product description
Part index
The index below refers to Fig. 1 on page 4.
1. Vacuum cleaner adaptor
2. Dust extraction outlet
3. Rear handle
4. Front handle
5. Spindle lock lever
6. Bevel adjustment
a. Fixation knob
b. Scale
7. Parallel guide xation knob
8. Base plate
9. Orientation mark
10. Parallel guide
a. Scale
11. Lower guard
12. Upper guard
13. Locking bolt
14. Locking ange
15. Saw blade
16. Backing ange* (in Fig. A)
17. Retraction lever
18. On/off switch
19. Lock-off button
20. Depth adjustment
a. Fixation lever
b. Scale
21. Air vents
22. Laser device
23. On/off switch for laser device
24. Hex key
NOTE: Parts marked with * are not shown in this overview. Please refer
to the respective section in the instruction manual.
Symbols
On the product, the rating label and within these instructions you will nd among others
the following symbols and abbreviations. Familiarize yourself with them to reduce
hazards like personal injuries and damage to property.
Always wear eye protection. Always wear ear protection.
Wear a dust mask. Wear protective gloves.
1400W circular saw MNL_ECS1400_TPS_GB_V1_V20518_20180605.indd 22 6/5/18 3:24 PM
To Next Page
Loading...
