Erbauer EDLS160 - Operating the Sander; Intended Use and Precautions; Controls and Operation

22
Use
Intended use
This product is intended for dry sanding of wood, plastic, metal, llers and coated
surfaces. This product should not be used on other materials or those harmful to
health.
Before you start
01
Protection
Controls
01
On/Off switch (Fig. E)
Operate the product in continuous mode.
1. Switch the product on by pressing the “ON / ─” button of the on/off switch (8).
2. Press the “OFF / O” button of the on/off switch (8) to switch the product off.
02
Finger pad (Fig. F)
Use the nger pad for corners and edges.
1. Unlock the nger pad locking knob (7).
2. Adjust the nger pad (6) to desired position.
3. Lock the nger pad locking knob (7).
160W Corner sander_MNL_EDLS160_TPS_GB_V1_V10518_20180607.indd 22 6/7/18 10:48 AM