16
p)
materials. Sparks could ignite these materials.
q) Do not use accessories that require liquid coolants.
Using water or other liquid coolants may result in
electrocution or shock.
SAFETY INSTRUCTIONS FOR LASER
a) Do not stare directly at the laser beam. A hazard may
exist if you deliberately stare into the beam.
b) The laser shall be used and maintained in accordance
with the manufacturer’s instructions.
c) Never aim the beam at any person or an object other
than the work piece.
d) The laser beam shall not be deliberately aimed at
another person and shall be prevented from being
directed towards the eye of a person for longer than
0.25 seconds.
e) Always ensure the laser beam is aimed at a sturdy
rough coated surfaces are acceptable. Bright shiny
laser beam back at the operator.
f) Do not change the laser device with a different type.
Repairs must be carried out by the manufacturer or an
authorized agent.
g) CAUTION: Use of controls or adjustments other than
exposure.
GENERA
ADDITIONA
CIRCULAR S
650W Mini circular saw_MNL_EMCS650_TPS_GB_V02_V20518_20180604.indd 16 6/4/18 09:20
λ=650nm P
0
≤1mW EN60825-1:2014
LASER
2
To Next Page
Loading...
