Erbauer EMIS216S - EMIS254 S & EMIS305 S Specifications

EN
19
For EMIS254S
Rated voltage, frequency : 220-240 V~, 50 Hz
Rated power input : 1800 W
Rated no load speed n
0
: 4500 min
-1
Blade size : Ø254 mm X Ø30 mm X 2.4 mm 48 T
Cutting capacity (bevel/mitre) : 0º / 0º: 90 × 305 mm
0º / 45º(left/right): 90 × 215 mm
45º(left) / 0º: 40 × 305 mm
45º(right) / 0º: 25 × 305 mm
45º(left) / 45º(left/right): 40 × 215 mm
45º(right) / 45º(left/right): 25 × 215 mm
Mitre capacity : left 52° ~ right 60°
Bevel capacity :
left 45° ~ right 45°
Protection class :
II
Weight : 20.49 kg
Sound pressure level L
pA
: 92 dB(A)
Sound power level L
WA
: 104 dB(A)
Uncertainty K
pA
, K
WA
: 3 dB(A)
For EMIS305S
Rated voltage, frequency : 220-240 V~, 50 Hz
Rated power input : 1800 W
Rated no load speed n
0
: 4200 min
-1
Blade size : Ø305 mm X Ø30 mm X 2.8 mm 48 T
Cutting capacity (bevel/mitre) : 0º / 0º: 100 × 355 mm
0º / 45º(left/right): 100 × 254 mm
45º(left) / 0º: 50 × 355 mm
45º(right) / 0º: 35 × 355 mm
45º(left) / 45º(left/right): 50 × 254 mm
45º(right) / 45º(left/right): 35 × 254 mm
Mitre capacity : left 52° ~ right 60°
Bevel capacity :
left 45° ~ right 45°
Protection class :
II
Weight : 24.82 kg
Sound pressure level L
pA
: 95 dB(A)
Sound power level L
WA
: 106 dB(A)
Uncertainty K
pA
, K
WA
: 3 dB(A)
The sound emission values have been obtained according to the noise test code given
in EN 62841-1 and EN 62841-3-9. The noise for the operator may exceed 80 dB(A)
and ear protection measures are necessary.