EasyManua.ls Logo

Erbauer EPHT18-Li - Maintenance, Storage, and Disposal; General Maintenance and Transportation; Recycling and Battery Disposal

Erbauer EPHT18-Li
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27
26
01
TECHNICAL SPECIFICATIONS
Rated voltage: 18 V d.c
Rated no load speed: 2800 /min
Max. cutting length: 410mm
Blade length: 450mm
Max. cutting capacity: 20mm
Angle at which the motor can be set: ±45° & ±90°
Max. length of the tool: 2.9m
Weight (without battery): 4.2kg
Ambient temperature range for tool and battery use: 0
to 40
For use with battery pack and charger as below:
Battery pack model: EBAT18-Li-2 / EBAT18-Li-4 / EBAT18-Li-5
(sold separately)
Charger model: EC18-Li / EFC18-Li / EMC18-Li
(sold separately)
Measured sound pressure level L
pA
: 69.62 dB(A)
Uncertainty K: 0.51 dB(A)
Measured sound power level L
WA
: 89.62 dB(A)
Uncertainty K: 0.51 dB(A)
Guaranteed sound power L
WA
: 92 dB(A)
Vibration level a
h
: 2.093 m/s²
Uncertainty K: 1.5 m/s²
The sound values have been determined according to noise test code given in EN
60745-2-15, using the basic standards EN ISO 11094 and EN ISO 3744.
The sound intensity level for the operator may exceed 80 dB(A) and ear protection
measures are necessary.
The declared vibration value has been measured in accordance with a standard test
method (according to EN 60745-1) and may be used for comparing one product with
another. The declared vibration value may also be used in a preliminary assessment of
exposure.
WARNING!
Depending on the actual use of the product the vibration
values can differ from the declared total. Adopt proper measures to
protect yourself against vibration exposures. Take the whole work process
including times the product is running under no load or switched off into
consideration. Proper measures include among others regular maintenance
and care of the product and accessories, keeping hands warm, periodical
breaks and proper planning of work processes.
RATING LABEL EXPLANATION
EPHT18-Li = MODEL NUMBER E = ERBAUER
PHT = POLE HEDGE TRIMMER
18 = 18 V d.c.
Li = LITHIUM
02
SYMBOLS
On the product, the rating label and within these instructions you will nd among others
the following symbols and abbreviations. Familiarise yourself with them to reduce
hazards like personal injuries and damage to property.
V~ Volt, (alternating voltage) V
Volt, (direct current voltage)
W Walt mA Milliampere
mAh Milliampere-hour A Ampere
/min per minute mm Millimetre
kg Kilogram dB(A) Decibel (A-rated)
m/s
2
Metres per seccond aquared
Lock / to tighten or secure Unlock / to loosen

Related product manuals