Erbauer EPHT18-Li - Maintenance and Storage

15
14
• after striking a foreign object;
• whenever the product starts vibrating abnormally.
f. Ensure that the hedge trimmer is correctly located in a
designated working position before switching on.
g. While operating the hedge trimmer, always ensure that the
operating position is safe and secure, especially when using
steps or a ladder.
h. Do not operate the hedge trimmer with a damaged or
excessively worn cutting device.
i. Always ensure that all handles and guards are tted when
using the hedge trimmer. Never attempt to use an incomplete
hedge trimmer or one tted with an unauthorised modication.
j. Always use two hands to operate a hedge trimmer tted with
two handles.
k. Always be aware of your surroundings and stay alert for
possible hazards of which you may not be aware due to the
noise of the product.
l. Take care against injury to feet and hands from the cutting
device.
m. Always ensure that the air vents are kept clear of debris.
n. Wear slip-resistant foot protection and protective clothing when
using this product.
o. Always keep proper footing and operate the product only when
standing on a xed, secure and level surface. Change working
positions regularly to avoid tiredness and ensure a comfortable
working position at all times.
p. Never use replacement parts or accessories not provided or
recommended by the manufacturer.
q. The use of this product may be restricted due to national
regulations.
MAINTENANCE AND STORAGE
a. Disconnect the product from the power supply (i.e. remove the
plug from the power supply or the battery pack) and check for
damage after use.
b. Disconnect the product from the power supply (i.e. remove the
plug from the power supply or the battery pack) before carrying
out maintenance or cleaning work.
c. Maintain and inspect your product regularly. Check for
misalignment or binding of moving parts, breakage of parts
and any other condition that may affect the product’s operation.
If damaged, have the product repaired before use. Many
accidents are caused by poorly maintained products.
d. Improper maintenance will lead to malfunction/failure of the
product.
e. Inspect the product before each use, after dropping the product
or exposing to other impacts to identify signicant defects.
Check for loose fasteners and damaged parts, such as cracks
in the cutting attachment.
f. Use only the manufacturer’s recommended replacement parts
and accessories.
g. inspect and maintain the product regularly. Have the product
repaired only by an authorised service centre or similar qualied
specialist.
h. When not in use, store the product out of the reach of children.
i. When transporting or storing the hedge trimmer, always t the
cutting device transport guard.
j. When the hedge trimmer is stopped for servicing, inspection or
storage, take out the batteries, make sure all moving parts have
come to a stop. Allow the hedge trimmer to cool before making
any inspections, adjustments, etc.