Erbauer EPHT18-Li - Page 6

11
10
f. K
eep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind and
are easier to control.
g. Us
e the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account
the working conditions and the work to be performed. Use
of the power tool for operations different from those intended
could result in a hazardous situation.
h.
Keep handles and grasping surfaces dry, clean and free
from oil and grease. Slippery handles and grasping surfaces
do not allow for safe handling and control of the tool in
unexpected situations.
BATTERY TOOL USE AND CARE
a. R
echarge only with the charger specied by the
manufacturer. A charger that is suitable for one type of battery
pack may create a risk of re when used with another battery
pack.
b. U
se power tools only with specically designated battery
packs. Use of any other battery packs may create a risk of
injury and re.
c. When
battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails, screws
or other small metal objects, that can make a connection
from one terminal to another. Shorting the battery terminals
together may cause burns or a re.
d. Unde
r abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs,
ush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause
irritation or burns.
e.
Do not use a battery pack or tool that is damaged or modied.
Damaged or modied batteries may exhibit unpredictable
behaviour resulting in re, explosion or risk of injury.
f.
Do not expose a battery pack or tool to re or excessive
temperature. Exposure to re or temperature above 130 °C
may cause explosion.
g.
Follow all charging instructions and do not charge
the battery pack or tool outside the temperature range
specied in the instructions. Charging improperly or at
temperatures outside the specied range may damage the
battery and increase the risk of re.
SERVICE
a. Ha
ve your power tool serviced by a qualied repair person
using only identical replacement parts. This will ensure that
the safety of the power tool is maintained.
b.
Never service damaged battery packs. Service of battery
packs should only be performed by the manufacturer or
authorized service providers.
POLE HEDGE TRIMMER SAFETY WARNINGS
a.
Keep all parts of the body away from the cutter blade. Do
not remove cut material or hold material to be cut when
blades are moving. Make sure the switch is off when
clearing jammed material. A moment of inattention while
operating the hedge trimmer may result in serious personal
injury.
b.
Carry the hedge trimmer by the handle with the cutter
blade stopped. When transporting or storing the hedge
trimmer always t the cutting device cover. Proper handling
of the hedge trimmer will reduce possible personal injury from
the cutter blades.
c.
Hold the power tool by insulated gripping surfaces only,
because the cutter blade may contact hidden wiring. Cutter
blades contacting a “live” wire may make exposed metal parts
of the power tool “live” and could give the operator an electric
shock.