21
02
Router bits
WARNING! Always use router bits according to the intended use!
Observe the technical specications of this product when purchasing and
using router bits!
Router bits are sharp and hot after use! Handle them with care! Wear
safety gloves when handling router bits to avoid injuries like burns and
cuts!
Types and shapes
Router bits with 1/4 inch or 6 mm shank can be used for this router. Below is only a
short overview of the most commonly shapes. Ask the store for more choices.
Type Prole
Straight bit
V groove bit
Core box bit
Dovetail bit
WARNING! Always ensure that the shaft diameter of the router bit
suits the collet tted with the product. Never use a router diameter with
a shaft that does not t to the collet. Specialized dealers offer collets in
different sizes.
710W router MNL_EPR710_TPS_GB_V1_V10518_20180606.indd 21 6/6/18 8:40 AM
To Next Page
Loading...