720W Tile Cutter
TECHNICAL DATA
Voltage: 230V~50Hz
Input power: 720W(S2 15min)
No load speed: 2800min
-1
(S2)
Diamond blade size: Ø180x2.2x Ø25.4mm(bore)
Max. cut at 90 degree: 35mm
Table tilting range: 0-45 degrees
Table size: 420 x 400mm
Weight: 14.2kg
NOTE: S2 means:After 15mm continous cutting,The motor must be switched off and
allowed to cool to room temperature.
NOISE AND VIBRATION DATA
Sound pressure level: 56.6dB (A)
Sound power level: 69.6dB (A)
Vibration level: 0.604m/s
2
ACCESSORIES
Parallel guide(includes 2clamps) 1pc
45 degree mitre guide 1pc
spanner 2pcs
To Next Page
Loading...
