240W 1/4 SHEET SANDER
TROUBLESHOOTING
1. If your sander will not operate, check the power
at the mains plug.
2. If the sander does not abrade surface, check the
sanding paper. If the sanding paper have been
worn, replace the new paper and try again. The
paper must be kept in a dry place; If it is allowed
to become damp, the abrasive particles will lose
their adhesion to the backing paper and will not
abrade.
3. If the sander dose not move smoothly, The
sanding paper may be loose, damaged or
wrinkled. Replace and try again.
4. If a fault can not be rectied return the sander to
an authorized dealer for repair.
ENVIRONMENTAL PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice. For
further information visit www.recycle-more.co.uk.
To Next Page
Loading...
