OpERATION
Warning: Before using your sander be sure to
read the instruction manual carefully.
INTENDED USE
The machine is intended for dry sanding of wood,
plastic, filler and coated surfaces.
OPERATING INSTRUCTIONS
1. KNOW YOUR SANDER
The compact, lightweight design of this sander
allows it to fit into small areas that other sanders
can’t reach. It is ideal for sanding, polishing,
detailing, removing rust with sanding pads, tips,
polishing pads and scrubbing pads (include). It has
2 interchangeable bases for extra versatility in a wide
variety of large and small applications. It also features
hook-and-loop attachment for fast, easy sanding
pads attachment or removal. Before attempting to
use any tool, be sure to familiarise yourself with all
the operating features and safety instructions.
This sander has 2 interchangeable bases for extra
versatility. The large triangular base is for sanding
larger surfaces. The detail sanding attachment is
ideal for sanding corners and small, intricate, hard-
to-reach areas.
2. ELECTRICAL CONNECTION
Your sander has a precision-built electric motor
and it should only be connected to a 230-240V,
50Hz. Power supply (normal household current).
Do not operate on direct current (DC). This large
voltage drop will cause a loss of power that will
overheat the motor. If your sander does not operate
when plugged into an outlet, have a professional
electrician check the power supply.
Warning: Always switch off and unplug from
the mains before making any adjustment,
including replacing sanding base and fitting sanding
paper.
3. ROCKER SWITCH
To turn the sander “ON”, simply push the rocker
switch .To turn the sander “OFF”, push the rocker
switch again (See Fig. 1).
Fig 1
2
To Next Page
Loading...
