EN
43
WARNING! Always carry the product by its main handle.
Never use the cord for carrying the product.
Transportation
02
UK plug (only for UK market)
Replacement of the plug shall always be carried out by the manufacturer of the tool or
his service organization and follow the instructions below.
IMPORTANT: The wires in the mains lead are coloured in accordance with the following
code:
Blue – Neutral Brown – Live
As the colours of the wire in the mains lead of this product may not correspond with the
coloured marking identifying the terminals in your plug, proceed as follows. The wire,
which is coloured blue, must be connected to the terminal, which is marked with N or
coloured black. The wire, which is coloured brown, must be connected to the terminal,
which is marked L or coloured red.
WARNING! Never connect live or neutral wires to the earth terminal of
the plug, which is marked with E.
Only fit an approved 13 Amp BS 1363 or BS 1363/A plug and the correctly
rate fuse. If in doubt, consult a qualified electrician.
If a moulded plug is fitted and has to be removed take great care in disposing
of the plug and severed cable, it must be destroyed to prevent engaging
into a socket.
10 AMP fuse
approved to
BS 1362
Brown L(Live)
Cable grip
Outer sleeve
firmly clamped
Connect
Blue to
N(Neutral)
To Next Page
Loading...
