Erco & Gener GenPro 20e - Page 2

EG_GenProxxe_988_UG_008_UK Page 2 / 51
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO&GENER reserves the right to make any modifications.
Document history
Revision Modifications Author Date
000 CREATION (Version UK)
F. LE BRETON
M. REEVES
09/11/06
001
Modified schema 2-wire cable page 16.
Added Hardware WatchDog function page 11-30-35.
F. LE BRETON 20/02/07
002
Checked functionnal architecture page 30.
Added ROHS directive page 50.
F. LE BRETON 06/03/07
003
Removed Memory Flash 16 Mbits page 7.
Added warning SIM during the Firmware update (OS) page 26.
Modified Buzzer page 41.
F. LE BRETON 19/03/07
004
Modified idle mode page 39.
F. LE BRETON 18/07/07
005
Added Copyright chapter page 6.
Modified 2-wires micro FIT cable picture page 16.
F. LE BRETON 11/02/08
006
Modified Warning page 13
F. LE BRETON 24/03/09
007
Suppress the GenPro 10e and the GenPro 14e
YST 14/03/11
008
Added informations table of §
- 8.2.4 General purpose inputs / output
YST 24/06/11
The main modifications in this document compared to its previous version, are easily identifiable on a
monitor by means of the blue text.