Need help?Do you have a question about the Ergomotion JLDK.26.09.01 and is the answer not in the manual?
General| Model | JLDK.26.09.01 |
|---|---|
| Type | Remote Control |
| Power Source | Battery |
| Battery Type | CR2032 |
| Compatibility | Ergomotion beds |
| Functions | Massage |
Identifies and labels the buttons on the front of the remote control, including movement and flat functions.
Shows the back of the remote control, highlighting the pairing key and battery compartment.
Details the front panel of the control box, including reset, power, LED, and multifunction ports.
Illustrates the wiring between the remote, power supply, control box, and actuators.
Explains how to operate the head actuator using the UP and DOWN buttons on the remote.
Describes the operation of the foot actuator via the UP and DOWN buttons.
Details the automatic movement to the FLAT position and how to stop it.
Instructions on how to initiate the pairing process between the remote and control box.
Explains using the control box reset button for entering pairing mode and status indications.
Describes the use of the multifunction port for connecting other peripherals.
To Next Page
