To Next PageTo Next Page
Need help?Do you have a question about the Ergomotion RF392C and is the answer not in the manual?
Procedure for pairing the remote control with the control box and verifying successful connection.
Tests the head massage motor intensity cycles between 0-1-3-6.
Tests the foot massage motor intensity cycles between 0-1-3-6.
Tests the massage timer function and its cycle between 0-10-20-30min.
Tests the HEAD actuator movement when using the head up button.
Tests the HEAD actuator movement when using the head down button.
Tests the foot actuator movement when using the foot up button.
Tests the foot actuator movement when using the foot down button.
Tests the UBB button function for turning on and off.
Tests the zeroG button functionality and stopping the movement.
Tests memory 1 position setting and recalling.
Tests memory 2 position setting and recalling.
Tests memory 3 position setting and recalling.
Tests the FLAT button to move the actuator to the lowest position.
General| Model | RF392C |
|---|---|
| Type | Remote Control |
| Compatibility | Ergomotion adjustable bases |
| Battery Type | 2 x AAA batteries |
| Operating Frequency | 2.4 GHz |
| Operating Range | Up to 30 feet |
| Connectivity | RF (Radio Frequency) |
