Hydration / Drinking Tube
Open the Hydration compartment and fix the filled reservoir
on the mount (Fig. 1). Close the zip until the tube is clam-
ped in the tube feed-through provided on the right (Fig. 2).
Note the information on page 22 when using the
hydration reservoir and e-bike battery at the same time.
Using the opening for the hydration reservoir compartment, a
back protector can be inserted. Please ensure that the black
side of the back protector faces the back of the user. The
zipper should then be closed as much as possible at each
side.
Warning: The black side of the impact protector always
faces the wearer‘s back (Fig. 1).
Fig. 1
Fig. 1
Fig. 2
Fig. 2
Fig. 3
Please ensure that the
black side of the impact
protector faces the back
of the user.
Always read the instructions for the BP100
impact protector.
Impact Protector BP100 (available separately)
To Next Page
Loading...
