Rev B. 11/04 5 of 6 888-33-092-01
6
Test Monitor Swing (side-to-side movement).
Adjust as necessary.
1/2"
(13mm)
1/2"
(13mm)
OVERVIEW
After completion of installation steps, evaluate pivot function for your
specifi c installation. Ergotron’s pivot joints are factory set to provide
the proper pivot control and moving force for the majority of users.
If excessive force is required to adjust your setup, or if your monitor
does not remain in the desired position, pivot adjustment may be
required. Instructions for adjustment of the pivots can be found in the
following pages.
To Next Page
Loading...
