2 of 15
888-45-311-W-01 rev.J • 12/18
Safety
Important! You will need to adjust this product after installation is complete. Make sure all your equipment is properly
installed on the product before attempting adjustments. This product should move smoothly and easily through the
full range of motion and stay where you set it. If movements are too easy or diffi cult or if product does not stay in
desired positions, follow the adjustment instructions to create smooth and easy movements. Depending on your
product and the adjustment, it may take many turns to notice a difference. Any time equipment is added or removed
from this product, resulting in a change in the weight of the mounted load, you should repeat these adjustment steps
to ensure safe and optimum operation.
CAUTION: DO NOT rotate monitor past rear edge of desk. Doing so will create an unstable
situation and may cause equipment damage or personal injury.
To Next Page
Loading...
Need help?
General
