Ergotron StyleView - Quick Reference Manual

5˚
20˚
+
12˚
180˚
20"
(508 mm)
5"
(127 mm)
1
5
6
2
3
4
1
5
2
3
4
3x
16”
(406 mm)
12˚
www.ergotron.com
USA: 1-800-888-8458
Europe: +31 (0)33-45 45 600
China: 400-120-3051
Japan: japansupport@ergotron.com
777-24-046-G-01 rev. D • 03/19
STYLEVIEW®
QUICK REFERENCE
Release Brake to move riser.
Loosen knob,
tilt Display to
desired position
then retighten
knob.
ERGONOMICS
RANGE OF MOTION
Working customize - to your size
1 Set top of monitor screen about one inch below eye level - Release brake and lift or
lower riser as needed.
2 Tilt screen for comfortable viewing and to reduce eye and neck strain.
3 Pull keyboard tray forward and position mouse tray and mouse pouch on right or
left, as needed.
4 Work with elbows bent at about 90° to minimize muscle strain.
5 If the riser moves up and down with di culty, or if it drifts out of set position,
consult the product manual for adjustment information.
6 Stay in charge!
Powered carts should be plugged
into outlet as often as possible to
keep battery charged and computer
running.
Moving stow - before you go
1 During normal movement, release brake and lower worksurface to lowest
position for optimal stability and unobstructed view.
2 Tuck away open trays and return mouse, scanner and other accessories to
their places. Clear worksurface
3 Unlock both front casters.
4 Push cart from rear with elbows bent at about 90° to maximize control and
minimize muscle strain.
5 Don’t run out!
Before moving, make sure
cord is unplugged from
outlet and hooked to basket
for safe travel. Remember,
charge battery fully 100%
every day!
CAUTION! Completely
release brake engagement
before raising or lowering
the cart. Raising or lowering
the cart with the brake
partially engaged may cause
product damage.