888-45-291-W-01 rev.G • 12/15
4 of 13
1/4"
1/4”
8mm
1
0.78"-1.78" (20-45mm) 1.70"-2.56" (43-65mm)
4 mm
ENGLISH
Warning: Because mounting surface materials can vary widely, it is imperative that you make
sure mounting surface is strong enough to handle mounted product and equipment.
Mount arm to desk.
Tighten the bolts with the provided 8 mm wrench.
Clamp con gurations for di erent desk thickness
CAUTION! Tipping Hazard. Support the stand until
the clamp is securely tightened. Failure to follow
these instructions may result in the stand tipping
over causing possible equipment damages and or
personal injury.
To Next Page
Loading...
