Why Ergotron Indoor Furnishing legs only move down and not up?
If the legs of your Ergotron Indoor Furnishing desk only move down and not up, re-initialize the desk, following the 'Initialization Procedure'.
Why does Ergotron Indoor Furnishing desk go into the initialization process frequently?
If your Ergotron Indoor Furnishing desk frequently goes into the initialization process, make sure the added weight does not exceed the weight capacity and check the noise of the motor.
How to fix Ergotron Indoor Furnishing legs with no response after connecting the power and pressing up or down?
If the legs of your Ergotron Indoor Furnishing desk have no response after connecting the power and pressing up or down: 1. Re-initialize the desk. 2. Check if the cables are all connected properly.
General| Type | Corner |
|---|---|
| Keyboard tray | Yes |
| Product color | Black |
| Table top shape | - |
| Maximum weight capacity | 15.9 kg |
Weight and Dimensions| Weight | 26100 g |
|---|---|
| Package weight | 34500 g |
| Desk top size (W x D) | 914 x 600 mm |
Steps to initialize the desk for first use and ensure proper function.
Instructions for manually raising and lowering the electric standing desk.
How to save and recall preferred desk height positions.
Recalling previously saved desk height positions.
Changing the display between inches and centimeters.
Adjusting the display to accurately match the actual desk height.
Setting the minimum height limit for the desk.
Releasing the minimum height lock to allow full range of motion.
Explanation of error codes and their corresponding solutions.
Common problems encountered and their resolutions.
Explanation of safety symbols and their meanings.
Warnings and guidelines for safe use of power cables and electrical hazards.
Important cautions regarding product usage, environment, and liquids.
Maximum weight the desk can safely support.
How to get service, warranty, and contact details for support.
To Next Page