5 of 12
555-24-002-G-00 rev. B • 04/19
6
7
IMPORTANT! The Desk must be initialized before raising up and down for the fi rst time.
Follow 'Initialization Procedure' before raising or lowering the Desk.
2 person lift.
Initialization Procedure:
Move Up and Down:
The initialization procedure must be completed before the fi rst running after the desk is installed or parts are replaced.
When a re-initialization procedure is needed, unplug the desk from the wall for 30 seconds before re-initializing,
STEP OPERATION MOTION
1 Press and hold Λ & V simultaneously until legs stop
moving.
Legs move down at half speed of normal operation to the lowest postition and
rebound 2-5 mm, then stop.
2 Release Λ & V together. Initialization is complete.
STEP OPERATION MOTION
1 Press and hold Λ. Legs move up.
2 Release Λ. Legs stop.
3 Press and hold V. Legs move down.
4 Release V. Legs stop.
To Next Page
Loading...
