Ergotron WorkFit-P - Step 3: Platform Attachment

Adjustment Step
!
i"
: Increase Friction
-ff • If this product moves too easily fiom side-to-side, then you'll
1
need to increase friction:
' .Ma Decrease Friction
-- • If this product is too difficult to move from side-to-side, then
.
you'll need to decrease friction:
i
I
~
~w
13mm
WARNING! Sto ed Energy Hazard: The arm mechanism is
under tension a d will move up rapidly, on its own, as soon
as attached eq ipment is removed. For this reason, DO NOT
remove equipm nt unless the arm has been moved to the
highest position! Failure to follow this instruction may result
in serious persopal injury and/or equipment damage!
r .2.Smm
z