2 of 9
888-45-307-G-01 rev. F • 11/13
WARNING
ENGLISH
Important! You will need to adjust this product after installation is complete. Make sure all your
equipment is properly installed on the product before attempting adjustments. This product should move
smoothly and easily through the full range of motion and stay where you set it. If movements are too
easy or diffi cult or if product does not stay in desired positions, follow the adjustment instructions to
create smooth and easy movements. Depending on your product and the adjustment, it may take many
turns to notice a difference. Any time equipment is added or removed from this product, resulting in a
change in the weight of the mounted load, you should repeat these adjustment steps to ensure safe and
optimum operation.
CAUTION! Max weight 10 lbs (4.5 kg). Do not exceed maximum listed weight capacity.
Serious injury or property damage may occur!
Warning! Do not move arm until Lock is installed in the next step. Failure to follow these instructions may result in your arm
coming o the pole base and causing equipment damage and/or personal injury.
Warning! Remove arm from pole base before removing clamp or grommet hole mount from desk. Failure to follow these
instructions may result in the arm falling over causing equipment damage and/or personal injury.
Warning! Do not use with LCD on platform. Failure to follow these instructions will create an
unstable situation and may result in equipment damage and/or personal injury.
WARNING! Stored Energy Hazard: The arm mechanism is under tension and will move up rapidly, on its own, as
soon as attached equipment is removed. For this reason, DO NOT remove equipment unless the arm has been
moved to the highest position! Failure to follow this instruction may result in serious personal injury and/or
equipment damage!
To Next Page
Loading...
Need help?
General
