5 of 9
888-45-307-G-01 rev. F • 11/13
2
3
1x
1x
4 mm
ab c
8
1x
ENGLISH
Set-up Steps
Warning! Do not move arm until Lock is
installed in the next step. Failure to follow
these instructions may result in your arm
coming o the pole base and causing
equipment damage and/or personal injury.
The height of the Arms Stop can be moved up or
down on pole. If you would like to move the Arm
Stop, see page 8 for instructions.
WARNING: Arm must be removed from pole
before moving Arm Stop. Failure to remove arm
may result in equipment damage and/or personal
injury.
Arms Stop
Warning! When removing arm from desk,
remove arm from pole base before removing
clamp or grommet hole mount from desk.
Failure to follow these instructions may result
in the arm falling over causing equipment
damage and/or personal injury.
To Next Page
Loading...
