7 of 9
888-45-307-G-01 rev. F • 11/13
6
12
a
5mm
WARNING
ENGLISH
Increase Lift Strength
If the mounted weight is too heavy or this product does not
stay up when raised, then you'll need to increase Lift Strength:
Decrease Lift Strength
If the mounted weight is too light or this product does not stay
down when lowered, then you'll need to decrease Lift Strength:
Adjustment Step
Important! You will need to adjust this product after installation is complete. Make sure all
your equipment is properly installed on the product before attempting adjustments. This
product should move smoothly and easily through the full range of motion and stay where
you set it. If movements are too easy or diffi cult or if product does not stay in desired
positions, follow the adjustment instructions to create smooth and easy movements.
Depending on your product and the adjustment, it may take many turns to notice a
difference. Any time equipment is added or removed from this product, resulting in a
change in the weight of the mounted load, you should repeat these adjustment steps to
ensure safe and optimum operation.
WARNING! Stored Energy Hazard: The arm mechanism is under
tension and will move up rapidly, on its own, as soon as attached
equipment is removed. For this reason, DO NOT remove equipment
unless the arm has been moved to the highest position! Failure to
follow this instruction may result in serious personal injury and/or
equipment damage!
To Next Page
Loading...
