Erickson 07464 User Manual

Item No. 07464
English/French/Spanish Page 1 of 4
      
80” x 11” STEEL MESH LOADING RAMP
WARNING:
To avoid personal injury and/or property damage, please read and
follow ALL of these instructions before assembling and operating.
1. Never overload ramps. Maximum capacity for your ramp is 800 lbs per ramp; 1600
lbs per pair (all loads must be evenly distributed).
2. Always use safety strap to securely fasten the ramp to the vehicle. This prevents the
ramp from slipping off of the tailgate.
3. Carefully roll or winch equipment up or down the ramp. Never drive or ride your
equipment while loading or unloading.
4. Make sure the ramp is aligned with the wheels of the equipment being loaded or
unloaded.
5. Always load or unload on a solid, level and stable surface with the vehicle in park, the
parking/emergency brake on and the engine off.
6. Use as loading ramp only.
7. Ramp surfaces must be clean, dry and free from oil or grease or water.
8. Maximum recommended height is 30 inches.
9. Inspect ramp before each use. Tighten any loose hardware. Replace any worn or
damaged parts. Replace safety strap if webbing is frayed or worn. Do not attempt
to use a ramp that is damaged in any way. No modication, alteration or deviation to
the ramp are authorized by the manufacturer and shall not be made. Proper care and
maintenance of the ramp is essential to safety.
10. Proper use of this product is critical to safety and beyond the control of Erickson
Manufacturing Ltd. Erickson Manufacturing Ltd. neither guarantees nor is liable for
any damage resulting from improper use. The liability of this product is limited to its
purchase price if it proves to be defective in material and/or workmanship. Warranty
information is available upon request.

Erickson 07464 Specifications

General

Brand	Erickson
Model	07464
Category	Lifting Systems
Language	English

Summary

Product Safety and Operating Instructions

Ramp Weight Capacity and Distribution

Maximum capacity is 800 lbs per ramp; 1600 lbs per pair, with loads evenly distributed.

Secure Ramp Attachment and Usage

Always use the safety strap, align ramps, and ensure a stable, level surface for loading.

Pre-Use Inspection and Maintenance

Inspect ramp before each use, tighten hardware, replace worn parts, and do not use damaged ramps.

Product Specifications and Usage Guide

Loading Ramp Specifications

Details rated capacity (800 lbs/1600 lbs) and ramp dimensions (80" x 11" unfolded, 40" x 11" x 4 1/8" folded).

Step-by-Step Usage Instructions

Guides users through safe setup, securing the ramp, loading equipment, and post-use storage.

Warranty Information

1-Year Limited Warranty Details

Covers mechanical components for 1 year for original purchasers; 90 days for commercial use.

Warranty Service and Return Policy

Contact Technical Service for issues; do not return to place of purchase without authorization.

Warranty Exclusions and Limitations

Items Not Covered by Warranty

Excludes normal wear, misuse, accidents, cosmetic defects, wear items, and non-original parts.

Implied Warranty and Consequential Damage Limits

Disclaims liability for loss of time, use, freight, or consequential damages; limits warranty to purchase price.

Manufacturer Contact Information

Provides contact details for Erickson Manufacturing Ltd. for warranty inquiries and support.